Old post share.
Diffusion welcome.

Although our company that is usually remodeling a motorcycle, we spend a technique seriously and make a duralumin cutting ballpoint pen.
The name of the ballpoint pen “is MechaSEA”.

The first of the trial product was completed the other day.
Because I can not publish the appearance yet for reasons related to intellectual property, I could not quite tell the image.
But, I was able to make things that I can finally show.
It is an exterior box.
I am considering adopting A2017 to the material of the box of the initial lot.

Size feeling is like this.

I tried putting a commercially available ballpoint pen in it.
When all the development work is over, MechaSEA is enshrined here.
At that time, everyone should be crying.

There is a edge on the under side, and it fits here with the lid.

There are reasons why I chose this material.
I reveal the reason.

Originally I thought that I would like to adopt paper boxes with many achievements at other companies.
But, when ordering foil stamping or elaborate processing, we have to order a certain quantity. (Order of thousands)
Together with the die cost, hundreds of thousands of yen to about 1 million yen costs money.
This is an unavoidable amount of money because other companies pay for it as well.
But, due to my experiences so far, various unexpected things will happens at the beginning of the release.

New products often come to think that I want to change the specifications when dozens of shipments are shipped.
・I want to change the design.
・ There was a problem. I want to take measures.
etc.
In that case, I can not do anything if I ordered a large quantity of boxes.
I spend hundreds of thousands of yen again, and I have to order from a mold.
We cannot collect the cost of the amount if we do not sell these several hundred ballpoint pens either.
When we spend money on inventory, the movement of the company stops.

Also, from my experience, it will take a certain period of time for products to be recognized in the world.
So at my company, I am taking a system that will not die at least for one year of next year, even if there is no profit with this pen.
It is really painful to hold inventory of boxes during that period.

We thought a lot.
If it’s made of metal, the price of one box is very high.
But, because it can be manufactured in-house at my company, there is no risk when looking at the total.
It was the opposite result to a normal company.
My company has many processing machines.
And it is a special situation that developers, designers, person of processing, production engineers are the same person.
So it is necessary for me to think one by one without fitting it in general theory.
As long as there is no problem, I will continue development with made of metal
as it is.
And I would like to use a metal box for the first few months only.
I do not know what will happen yet.

Araki F Machine seriously introduced technology and made it.
It’s all made with cutting of the aluminum.
It’s extremely mechanical ballpoint pen, MechaSEA.
Tap the image or jump to the sales page by clicking.↓↓↓

Old post share.
Diffusion welcome.

Although our company that is usually remodeling a motorcycle, we spend a technique seriously and make a duralumin cutting ballpoint pen.
The name of the ballpoint pen “is MechaSEA”.

The first trial product was completed.
We cannot publish the whole aspect of the ballpoint pen until we make registration of a design.
So we publish only the tip of the ballpoint pen.
I’m sorry.
It is still only this one that has been completed.
So, if we accumulate the cost that we have taken so far, it is a ballpoint pen of one 1,200,000 yen.

Because it was completed, it must do an appearance image, feel of a material, operation feeling, design check, durability test.
The task of verifying that there is no problem even if we sell such products is called product evaluation.
This is because I had a chance to go out to work as a temporary employee when the financial situation became dangerous since I made Araki F machine, so this business has been experienced within a major manufacturer.
Besides, salary was very cheap.
Because my friend also worked on mobile phone development, I asked about the evaluation condition at that time.↓↓

・The drop test is 1.5m in height, floor concrete; each corner and each side four sets.
Because it is each side at each corner in one set, it will be dropped many times in one set.

By the way, it seems that it broke as soon as dropping the iPhone under the same conditions.
It is not such a simple thing if I think that only fall strength leads to consumers satisfaction.
It is a game of comprehensive power including all design and parts supply.

・ Opening and closing 100,000 times.
When the opening / closing testing equipment was full, it seems that it was done 100,000 times with human power.

Although my company is a venture company, I assume the usage situation with reference to mobile phone and home appliances, and I have to do evaluation test by setting conditions without excess or deficiency.
Unlike major companies, the cost burden is severe …

I think that the specification will change from now if we conducted the test.
Development is like that a thing.

Araki F Machine seriously introduced technology and made it.
It’s all made with cutting of the aluminum.
It’s extremely mechanical ballpoint pen, MechaSEA.
Tap the image or jump to the sales page by clicking.↓↓↓