<\/p>\n
Because the piston fits into the cylinder, I will assemble the head.<\/p>\n
I kept shim and valve lifter in the paper cup and I will return it to the original place.
\nIf I do not return it to the same place the valve clearance will change.
\nI have to make sure not to make a mistake.
\nI am writing a place into a the paper cup.<\/p>\n
By the way, the valve clearance examined on the net is \u2193. Because Cub is around 0.05 mm, it is about 3 to 4 times. I do air blow one by one and assemble it. Because the piston fits into the cylinder, I will assemble the head. I kept shim and valve lifter in the paper cup and I will return it to the original place. If I do not return it to the same place the valve clearance will change. I have to make sure not to make a mistake. I am writing a place into a the paper cup. By the way, the valve clearance examined on the net is \u2193. IN\u30fb\u30fb\u30fb0.17mm\uff5e0.27mm EX\u30fb\u30fb\u30fb0.20mm\uff5e0.30mm It is quite wide.Moreover, the allowable range is wide. Because Cub is around 0.05 mm, it is about 3 to 4 times. Because the port is long in the longitudinal … Continue reading Bandit 250 engine,assemble around the valve<\/span>
\nIN\u30fb\u30fb\u30fb0.17mm\uff5e0.27mm
\n<\/span>EX\u30fb\u30fb\u30fb0.20mm\uff5e0.30mm
\nIt is quite wide.Moreover, the allowable range is wide.<\/p>\n
\nBecause the port is long in the longitudinal direction, the valve will also become longer and linearly expand.
\nThe other day I did the valve rubbing, but I can only sharpen at 1\/100 units at most.
\nSo has no influence.<\/p>\n<\/p>\n
\nI am careful that I fly it and do not lose it.<\/p>\n<\/p>\n","protected":false},"excerpt":{"rendered":"