The cylinder was completed.
\nI have assembled a piston ring on the piston and assembled a piston on the connecting rod.
\nI try to put a piston in the cylinder, but it does not fit in.<\/p>\n
This piston ring is tight with tension.It protrude from the ring groove by default.<\/p>\n
<\/p>\n
I cut empty cans and made it a piston ring compressor.<\/p>\n
<\/p>\n
<\/p>\n
<\/p>\n
But the cans are also fit together and it will not fit in.
\nI used an aluminum can, but it is thin.
\nIt might have been successful if it was a thick can, such as a spray can.<\/p>\n
The piston ring compressor I have can not be used dimensionally.<\/p>\n
<\/p>\n
I polished the chamfering of the skirt of the sleeve smoothly, but there is no effect.<\/p>\n
I decided to put in a piston first.<\/p>\n
<\/p>\n
Oh my god!
\nPiston pin can not be passed through.
\nAlso the liquid gasket has dried up.<\/p>\n
<\/p>\n
A full day passed just to put a piston.
\nI want you to return the time.<\/p>\n","protected":false},"excerpt":{"rendered":"
The cylinder was completed. I have assembled a piston ring on the piston and assembled a piston on the connecting rod. I try to put a piston in the cylinder, but it does not fit in. This piston ring is tight with tension.It protrude from the ring groove by default. I cut empty cans and made it a piston ring compressor. But the cans are also fit together and it will not fit in. I used an aluminum can, but it is thin. It might have been successful if it was a thick can, such as a spray can. The piston ring compressor I have can not be used dimensionally. … Continue reading Bandit 250 engine, piston rings do not fit<\/span>