It is exchange of wheel bearing.
\nPull out with such a special tool.<\/p>\n
<\/p>\n
But, since I bought a TIG, I often weld iron bars and pull out them out by hitting them with a long stick from the inside.<\/p>\n
<\/p>\n
If one side is pulled out, the other side can come off easily.
\nAnd, I hit a new bearing and put it in.<\/p>\n
<\/p>\n
One side is gone.It went somewhere.
\nThis day was New Year’s Eve.
\nI was in great trouble.And I went to Benizen and it was open there.Moreover, there was inventory there.
\nBenizen is very reliable at such time.<\/p>\n
<\/p>\n
I could assemble it before I passed the year.<\/p>\n
<\/p>\n
In addition, I replaced the reused brake seal with a new one.
\nBy removing the piston, since the fluid came out, I did air vent again.<\/p>\n
<\/p>\n
Completion.<\/p>\n
<\/p>\n
I got on Bandit, but it became silky.It is very comfortable.
\nIt is also effective to change the oil to 12.5.
\nThe brakes front came to react early.<\/p>\n
<\/p>\n
There is momentum too much and, I forgot to attach a side cover.<\/p>\n
When overhaul around the suspension,It is very good that ride comfort changes dramatically.
\nIt is the best.<\/p>\n","protected":false},"excerpt":{"rendered":"
It is exchange of wheel bearing. Pull out with such a special tool. But, since I bought a TIG, I often weld iron bars and pull out them out by hitting them with a long stick from the inside. If one side is pulled out, the other side can come off easily. And, I hit a new bearing and put it in. One side is gone.It went somewhere. This day was New Year’s Eve. I was in great trouble.And I went to Benizen and it was open there.Moreover, there was inventory there. Benizen is very reliable at such time. I could assemble it before I passed the year. In addition, … Continue reading Bandit 250, overhaul around the front (Part 2)<\/span>