All posts by arakif

SR 400, 500 dry clutch, improvement result of release

SR400,500

This is a part pushed by the rod when turn off the clutch.By grasping the clutch lever, this floats the plate of the clutch via wires, arms, rods, etc.

The beginning I was making it at 45C crude,because it was dented like the one below, the material was changed to the quenched item of SKS 3. On the photo.

The effect is remarkable.Quenching is fire and oil quenching using our acetylene burner in the our company,It is being quenched properly.

I did not do any quenching temperature control,after hardening it rubs with a file and check the hardness, so there is no problem in practical use.

SR 400, 500 dry clutch,Very good condition.

SR400,500

After improving various things, it is a dry clutch that is feeling very good.
Because it became the specification that can be sold, I ordered the material for 3 sets.
However, in order to sell the kit, you have to order the case with a casting.It is  difficult.
And,It is cheaper to handle it with additional processing as it is possible to use the original parts.clutch basket, primary gear, clutch cover, etc.

So for the time being,
● Sales of vehicles incorporating this
● Keep the vehicle and process it
I would like to additional machining normal parts in this way and sell it.

Because,the maintenance business shrank,When we start selling, we will not accept acceptance of processing requests from individual customers directly.
I would like to accept it via a shop somewhere.

Production movie is here.
↓↓↓↓↓