All posts by arakif

I make a Bimota SB6 Replica from Suzuki GAG. Production of stem for KSR.

Demon of SUZUKI GAG, KSR110

Old post share.
Diffusion welcome.

I make GAG a Bimota replica and, I do 3D scan, push forward the design of the body.
The circumference of the fork divert a thing for KSR.
So the top bridge completed the thing which deformed size small to match KSR.

Naturally the under bracket uses the thing for KSR.
Therefore, I thought that I would like to use the products of my company as it is.
But, it ended the development work, but is the product that the preparation of the mass production is delayed.
Parts number KSR-STM 1, JAN code 4580393560702.

I intended to make it after the production of the body was over.
But, we received inquiries from general customers about whether or not we can be manufactured.
So I decided to produce it this week at last.

It is a headlight stay and a steering wheel stopper to have been a difficult point.

If this is integrated and shave off, it must be made from a very thick mass.
So, the screw stop was made separate.
But, I do not think it is a good idea as an article for sale when it is an ordinary square block.
So I sharpened it and made it elaborate. Like this ↓

It is difficult work to make this jig.
But, in violation of “Toyota Production System one-piece flow” adopted by my company, I made it “multi-cavity”.
Then Mr. Kikawa made it in a moment.
One – piece flow is severe if there are not more than a certain number of sales.

The part of the stem shaft was made a little while ago in the outside order and there is stock.
It is made of A7075 of aluminum harder than soft iron.

It penetrates the long drill in the middle and is hollow.
It is light.
When I measured the weight of it, it was lightness of the amazing.
Because it is long, I follow on the next time.

 

I make a Bimota SB6 Replica from Suzuki GAG. Create 3D data from photograph. Even tractors behind…

Demon of SUZUKI GAG

Old post share.

Last time, I tried experimenting to see if I can 3D scan by putting up the assembled used frame out.

But today is good weather. I lose a motivation of the work.
And the chirping of the birds.
Why do they need to keep chirping every year?
I don’t know why.

Mr. Kikawa is doing the chassis production project.
And I (Araki) writes a blog.

I have not heard anything about what software to use about this, but the software to use seems to be this. ↓
AUTODESK Remake
Since it is an English site, what I translated into Japanese by Google translation is here.

This software, it seems that beta version was available for free a while under the name “Mement” a while ago.
But, it seems now that it became “Remake” and became a product version.
To use the Japanese version, it is 5400 yen per month, 49680 yen per year.
The free trial period is one month.
But, there seems to be a free version in the English version. (← Maybe he used this?)

This is a software to create a 3D model from the photograph of the target object.
But, of course it cannot understand unevenness with one piece of photograph.
So, I will shoot a lot of photographs with slightly different shooting angles.
In this way.↑
And upload the photographs to the cloud and process it to 3D.
I do not know what kind of processing is being done, but wait for a certain time, 3D data will be generated. (It was about 10 minutes this time.)
If you do not want to use the cloud, you can install it on your own personal computer and do 3D processing.
But, it is considerable high spec when I watch recommended specifications. (Click here)

I translated it with Google translation.
Recommended requirements
64 bit Microsoft® Windows® 7 or later
128GB system RAM
NVMe PCIe SSD, 100GB of free space
Nvidia GFX card:
• One or more Quadro M6000 cards or
• One GeForce Titan X with 12 GB VRAM
Multiple Xeon processors

The memory of 128 giga will be impossible.
Quadro M6000 graphic board alone will cost around 600,000 yen.

The tractor at the back was also made into 3D together.↑

I was surprised at being colored. The texture is attached to it, too.

When it is screenshot, it looks like only a common photograph. So it’s a video. ↓

Although the swing arm and the shadow portion of the frame are not well removed, it is enough as an experiment.
When removing the texture, it is connecting the points with a triangle.
It looks like a Virtua Fighter.
The dimensions seem to be automatically fixed at a value entirely different from the real thing.
In order to match the dimensions with the real thing it has to be enlarged or reduced.

I was able to migrate the data to CAD (FUSION360) and deploy it.
This time, because it is an frame of autobike, it is left-right symmetrical.
If there is one side, I photographed only the right side because I make a mirror copy by CAD.
So, the left side of the model is missing.

If I take a picture that Remake can handle easily, it can increase the accuracy of the model.
So when actually doing, it seems to introduce it along with how to use detailed software. (This scan is like the experiment.)
This is knowledge obtained by taking pictures, waiting for uploading, checking the result, shooting again, and spending tremendous effort.
But, it seems to be open to the public generously.

When I am urinating I found four leaf clover underfoot.
I seem to have possibilities to be lucky.