Monthly Archives: May 2017

I make a Bimota SB6 Replica from Suzuki GAG. Calculate the dimensions of the car body somehow from photos etc.

Demon of SUZUKI GAG

Old post share.

I will remodeling GAG which is motorized bicycle and make mini SB6.
Ultimately I will shrink / deform this to about 3/4.
But, it is hard to begin with the nothing scenes.
So, I looked for it on the WEB.
As a result, I found a photograph with little distortion of SB6.
I traced each main part based on the distance between the axle.

I wrote a rough drawing with the actual size.

I infer the rough dimensions of the dimension of each parts from this figure.
The sinking condition of the suspension at 1G (the state that put up a motorcycle only by gravity) is automatically determined.
Because the state of this photograph is 1G.

And I assemble this used part to this dimensions.
Frame, swing arm, tank ↓

This time, not only the frame but cowl, tank etc etc are almost gathered except for the engine.

So, I plan to assemble all of them and try 3D scan.
I will try a way to do it without using expensive equipment.
Please look forward to!
Of course I’ll make it all public.

Machining was delivered by being wrapped in futon.

MECHASEA ballpoint pen, Production facilities

Old post share.

It is called tapping center even if it say machinning because it is a ROBODRILL of FANUC Corporation.
This machine body was less than 2,500,000 yen.
The model year is about 2000 years.

There is ROBODRILL which I bought at the time of Lehman shock in the right neighbor.
That was the 2005 model, I bought it for 3 million yen at that time.
But, now that the economy has improved, it seems to be close to 6 million yen.
Nice words. I profited for 3 million yen.
In other words, is ROBODRILL which I bought this time to be free of charge?

For a while from the Lehman shock, there was a period during which novel ROBODRILL were not sold.
In this way,I heard to the person of the used goods machine shop.
From 2008 to around 2013?
At that time most companies let an employee take a rest and got compensation and did it for OK even if they worked part-time.
So, a few years later it seems that the used ROBODRILL depletion era will come.

If used goods do not get, my company creates it by itself or lease a new one.
But it is 6 million yen to around 12 million yen even if ROBODRILL is new.
It is a very cheap class as machining.
So, if it is the company which a fund goes around, it is not necessary to buy used goods.

If you load ROBODRILL you can do until leveling. ↓

With this, I can produce ball-point pen MechaSEA by two systems.